| Description |
Field of application |
Leaflets/
download |
Electric-Internal Vibrators
Series NCZ |
|
- Special suspension of the eccentric weight
- Nominal frequency 12.000 min-1
- Centrifugal force from 1.160 N to 10.470 N
- Compacting efficiency 16 m3/h to 65 m3/h
|
|
Electric-Internal Vibrators
Series NCX |
|
- Nominal frequency 12.000 min-1
- Centroifugal force from 1.160 N to 6.000 N
- Compacting efficiency 11 m3/h to 60 m3/h
|
|
Electric-Internal Vibrators
Series NCE, NXE |
|
- Direct connection to 230 V
- Light weight, easy handling
- Nominal frequency 12.000 min-1
- Centrifugal force 1.600 N to 6.500 N
- Compacting efficiency from 11 m3/h to 65 m3/h
|
|
Pneumatic Internal Vibrators
Series NVL |
|
- Centrifugal force 650 N to 34.300 N
- Adjustable speed
- No bearings, therefore scarcely any wear
|
|
Electronic Frequency Converters
Series NFC |
|
- Strong output power
- Considerably lower weight compared to rotating converters
- Switch off at overload and immediate restart
- Phase control - protection of high frequency internal vibrators
|
- Power supply of internal vibrators
|
Frequency and Voltage Converters
Series FSW |
|
- Robust and approved design
- Long lifetime
- IP 54 isolation specification F
- Primary: 230V or 400 V, 50 Hz
- Secondary: optional 42 V, 200 Hz or 250 V, 200 Hz
|
- Power supply of internal vibrators
- Power supply of electric external vibrators
|
Diesel-Generators
Series NFG |
|
- Robust and approved design
- Long lifetime
- IP 54 isolation specification F
- Primary: 230V or 400 V, 50 Hz
- Secondary: optional 42 V, 200 Hz or
250 V, 200 Hz
|
- Power supply of internal vibrators
- Power supply of electric external vibrators
|
Electric External Vibrators
Series NEG |
|
- Circular vibration
- Integrated terminal box
- Maintenance-free operation
- Controllable with Netter frequency converters
- For Atex Zone 21, 22 certified
|
- Drives for feeders and sieves
- Loosening of adhesions
- Concrete compaction in tunnel
formworks and in moulds used
in plants which manufacture pre-fabricated parts
|
Electric External Vibrators
Series NEG/NEH |
|
- Connection 42 V, 200 Hz /250 V, 200 Hz
- Frequency 3.000 min-1 or 6.000 min-1
- High centrifugal force
- Circular vibration
|
- Concrete compaction in tunnel
formworks and in moulds used in plants which manufacture pre-fabricated parts
|
Pneumatic External Vibrators
Series NVR/NVG/NVT/NQT |
|
- Circular vibration
- High frequency
- Very high centrifugal forces
- Robust design
- Can be easily repositioned using quick release brackets NVH
|
- Concrete compaction in tunnel formworks
- Conveying
- Loosening
- Emptying
|
Multiple-Shaft Vibration Systems
Series VectorDrive |
|
- Resonance-free start and stop
- Amplitude adjustment during operation
- Frequency control during operation
- 100% controlled vibration in each direction
- Prevention of resonance and associated noise
|
- Compacting
- Feeding
- Mixing
- Distributing
|
Shaker Station for Concrete Compaction
Series GyroShake |
|
- System for silent compaction, noise level below 70 dB(A)
- Shaker station with at least 4 electric unlalance motors
- Regulation of frequency and amplitude during operation
- Shaker station size as per customer's requirement
|
- Compaction of concrete in pre-
cast part manufacturing plants
|
Hydraulic external vibrators
Series CV/CC/CCV/DV |
|
- Driven by flanged hydraulic motor
- Trucks and tractors which use hydraulic energy for dumping and lifting, are sources of hydraulic power
- Very high centrifugal force
|
- Container discharge
- Sieving and conveying
- »mobile Machines«
|
Hydraulic external vibrators
Series NHG L |
|
- Driven by flanged hydraulic motor
- High centrifugal force
|
- Emptying bulk material
- Sieving and conveying
- »mobile Machines«
|
Mass Concrete Compacting Unit
Series NVI |
|
- Montage an Hydrauliklader oder Hydraulikbagger
- Driven by the hydraulic system of the carrier, independently of external power supplies
- Variable mounting
|
- Compaction of mass concrete of biggest granulometry
|
Vacuum Fixing Devices for Vibrators
Series VAC |
|
- Quick mounting without bolting or welding
- Can be repositioned quickly
- Can also be used on curved or uneven surfaces
|
- Used as vibration-tool for maintenance
|
Pneumatic Turbine Vibrators
Series NCT |
|
- Rotary vibration
- High frquency
- Frequency continuously adjustable via air pressur
|
- Loosening
- Feeding of bulk material
- Preventing adhesion to pipes and plates
|
Pneumatic Roller Vibrators
Series NCR |
|
- Rotary vibration
- High propulsive power
- Frequency continuously adjustable via air pressure
- Suitable for temperatures up to 200ºC
|
- Loosening
- Feeding of bulk material
- Preventing adhesion to pipes and plates
|
Pneumatic Ball Vibrators
Series NCB |
|
- Rotary vibration
- Frequency continuously adjustable via air pressure
- Suitable for temperatures up to 200ºC
|
- Loosening
- Feeding of bulk material
- Preventing adhesion to pipes and plates
|
Pneumatic Linear Vibrators
Series NTS |
|
- Linear vibration
- Frequency and amplitude can be adjusted separately
- Synchronous operation possible (NTS 350 and higher)
- Immediate start and stopp
|
- Drive for feeders and convayors
- Emptying
- Compacting
|
| |
| NetterVibration in the construction industry |
|
Here you find all above leaflets in one file (ca. 3,5MB) |
|
 |
|
|
+49 6134 29 01-0
