Free Application Support: 

+49 6134 290177

ATEX Vibrators

Series NTP Pneumatic Linear Vibrators

The pneumatic linear vibrators of the series NTP are especially suitable for knocking off material adhering to container walls in funnels, containers, silos and hoppers. Special features of NTP vibrators are: impacts like a rubber hammer or vibration with high peak acceleration.

The linear vibration is produced by a freely vibrating differential pressure piston. In a standard application, the piston knocks against an elastomer impact plate and works like a rubber hammer.

When used without an impact plate, the piston works against an air cushion and reduces noise. Hard knocking versions are available. The frequency can be adjusted by varying the pressure of the air supply and the amplitude by throttling the exhaust.

Lubrication-free operation is possible. ATEX-compliant linear vibrators of the series NTP and units with stainless steel housing are available.

  • Linear vibration
  • Nominal frequencies from 1,328  min-1
    to 8,784 min-1
  • Centrifugal forces from 190 N to 2,039 N
  • Frequency and amplitude are adjustable separately
  • Available in ATEX-compliant or stainless steel
  • Knocking off material adhering to container walls in funnels, containers, silos and hoppers
  • Drives for vibrating tables and chutes
  • Assistance for emptying containers

Drawings

Title File (PDF) File (DXF) File (STEP)
NTP 18 (All Versions)
Title File (PDF) File (DXF) File (STEP)
NTP 25 (All Versions)
Title File (PDF) File (DXF) File (STEP)
NTP 32 (All Versions)
Title File (PDF) File (DXF) File (STEP)
NTP 48 (All Versions)

(copy 1)

  • PKL 740 on pipe by NetterVibration
    Customised Consoles for Vibrators

    We have designed and manufactured vibrators and pneumatic knockers for pipes, moving structures, heat exchangers and complexe-shaped silos. Whatever the application, whatever your requirements, we will provide a customised solution, increasing your plant’s performance.

  • pneumatic maintenance unit NWE by Netter Vibration
    Series NWE, NFR and NOE Pneumatic Maintenance Units

    Our pneumatic maintenance units supply pneumatic vibrators with the right amount of clean and lubricated compressed air for each application.

  • vacuum fixing device VAC 15 with PKL 740 ST by NetterVibration
    Series VAC Vacuum Fixing Devices

    With NetterVibration's vacuum fixing device of the series VAC, you can apply vibration equipment to containers without having to install the vibrators permanently.