Free Application Support
Linear Vibrators

Series NTS Pneumatic Linear Vibrators

Pneumatic Linear Vibrator Series NTS

The pneumatic linear vibrators series NTS are especially suitable for conveying, emptying and compacting bulk material, due to the completely linear vibration. They are used to empty bins and as drives for conveyor and dosing troughs.

A special feature of NTS vibrators is the possibility of the synchronous operation of several NTS when using a coupling kit.

The vibration (sinusoidal oscillation) is produced by a freely vibrating, self-reversing piston. This oscillation supports, expedites or enables a variety of applications. NTS linear vibrators start and stop without delay in any installed position.

The amplitude is adjusted by means of the optional throttle valve. An increase of the supply pressure causes a higher frequency. ATEX-compliant linear vibrators of the NTS series and units with a stainless steel and plastic housing are available.


  • Linear vibration
  • Resistant against aggressive environmental conditions
  • Nominal frequency from 827 min-1 to 9,040 min-1
  • Centrifugal force 32 N to 21,808 N
  • Frequency and amplitude are adjustable separately
  • Synchronous operation possible (NTS 350 and higher)
  • Available in ATEX-compliant or in stainless steel

BrochureOperating instructions





NTS Small
TitleFile (PDF)File (DXF)File (STEP)
NTS 80
NTS 120 HF
NTS 120 NF
NTS 180 HF
NTS 180 NF
NTS 250 HF
NTS 250 NF
NTS 350 HF
NTS 350 NF
NTS 100/01
NTS Medium
TitleFile (PDF)File (DXF)File (STEP)
NTS 75/01
NTS 50/01
NTS 70/02
NTS 54/02
NTS 50/04
NTS 21/04
NTS 50/08
TitleFile (PDF)File (DXF)File (STEP)
NTS 50/10
NTS 30/10
NTS 50/15
NTS 50/20
NTS 30/20
NTS 24/20
NTS 50/40
NTS 20/40


NetterVibration Vacuum Fixing Device Series VAC 15 with Pneumatic Impactor Series PKL 740 ST

With NetterVibration‘s series VAC vacuum fixing device, you can apply vibration equipment to containers without having to install the vibrators permanently.

Netter Klebekonsole Serie NKK mit NCT

Glueing consoles series NKK ensure the efficient transmission of vibration energy through a solid and reliable installation.

NetterVibration Maintenance Unit Series NWE

The maintenance units and their individual components available from NetterVibration supply pneumatic vibrators with the right amount of clean and lubricated compressed air for each application, improving the reliability and increasing the service life of your pneumatic equipment.

Related Products